C.R.Laurence
Il vostro conto  Vedere il carrello  AccediEsci


Ingrandire l'immagine

Catalog Number: RS0B25BS
Finitura: BRUSHED STAINLESS


  • For Use with 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass or 9/16" and 27/32" (13.52 and 21.52 mm) Laminated Tempered Glass Using Kuraray SentryGlas® Interlayer

  • High Grade Alloy 316 Stainless Steel Standard

  • Designed to Mount to Wood, Concrete or Steel
  • Custom Sizes and Finishes Available

  • This CRL Point Supported Standoff Fitting has a 4" x 9-1/4" (102 x 235 mm) back plate giving the installer more adjustment, and four anchor points during installation for those tricky job site mounting conditions. The steel back plate can be fastened directly to steel, concrete, or wood substrates and includes a cover plate. This versatile Standoff Fitting features a 2-3/8" (60 mm) diameter domed cap with a 3/8"-16 threaded stainless steel rod to secure the glass panel.



    CRL Brushed Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting with Mounting Plate


     


    Altri prodotti/finiture:

    NUMERO ARTICOLO DESCRIZIONE COLORE
    RS0B25BS CRL Brushed Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting with Mounting Plate
    RS0B25PS CRL Polished Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting With Mounting Plate

    Numero articolo:RS0B25BS
    Disponibile anche in questi cataloghi:
    CRL63R Architectural Railing Systems, PAGINA 249R
    HR18 Architectural Railing Systems 2018, PAGINA 270B
    SC18 Standoff and Clamp Hardware, PAGINA 35SC
    CRL63A Architectural Hardware Master, PAGINA 649H
    CRL93A Architectural Railings, PAGINA HR089
    Colore:Brushed Stainless
    Spedire via::Si può spedire con UPS
    Ordine Minimo:1 Each

    The 2-3/8" (60 mm) diameter Standoffs are mechanically fastened to a 3/8" (10 mm) thick Alloy 316 grade stainless steel back plate that is pre-drilled for mounting. Two popular stainless steel finishes are available from stock. If your customer has a special job site condition, custom diameters and lengths are also available. Attachment anchors for wood, concrete or steel are sold separately.

    SPECIFICATIONS:
    For use with 1/2" or 3/4" (12 or 19 mm) Monolithic Tempered Glass. Also for use with 9/16" or 27/32" (13.52 or 21.52 mm) Laminated Tempered Glass using Kuraray SentryGlas® Interlayer. Do not use with raw or annealed glass.

    GLASS FABRICATION: Two 3/4" (19 mm) Diameter Holes Per Fitting.

    Spacing: Maximum spacing between fittings depends on use and mounting conditions; Minimum hole spacing between standoffs is 4" (102 mm). See our engineering report at http://www.crlaurence.com/datasheets/testreports/docs/Standoff_Railing_Sys_Rep_032713.pdf

    For use with 1/2" or 3/4" (12 or 19 mm) tempered glass. Do not use with raw or annealed glass. NOTE: Maximum bracket spacing is 24" (610 mm) on center with 48" (1.22 m) maximum glass panel widths.

    Il peso delle spedizioni è nella maggior parte dei casi approssimato e non è stato ancora verificato. Se si desidera ottenere il peso esatto, in modo tale da determinare i costi di spedizione come richiesto per completare l'ordine, si prega di richiederlo prima di inviare l'ordine contattandoCRL Assistenza al cliente.Le immagini dei prodotti sono dello stesso prodotto o di una fedele rappresentazione. ColorsI coloripossono variare a seconda della scheda video del vostro computer o del monitor e di come icolorcolorisono stati regolati.