C.R.Laurence
Il vostro conto  Vedere il carrello  AccediEsci


Ingrandire l'immagine

Catalog Number: CRL380HBS
Finitura: BRUSHED STAINLESS


  • 2-9/16" [65 mm} Pivot Point

  • Available in Brushed and Polished Stainless and Matte Black Finishes

  • Accommodates 3/8" to 1/2" (10 to 12 mm) Tempered Glass
  • Flush Mount - No Hole Required in the Floor
  • For Interior Use Only
  • Must be used with PH21A top patches
  • BS EN1154 tested to 500,000 cycles

  • CRL380 Series Hydraulic Patch Fittings are medium duty for interior use. There are two adjustment screws to adjust the latching speed and the swing speed. The Hydraulic Patch Fitting is designed for installation without the need for any other floor or overhead closing devices. Maximum door width is 39" (1 m) and maximum weight is 220 lbs (100kg). Fitting can accommodate 3/8" (10 mm), and 1/2" (12 mm) tempered glass. Glass fabrication (cut-out) is required.



    CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model


     


    Altri prodotti/finiture:

    NUMERO ARTICOLO DESCRIZIONE COLORE
    CRL380A CRL Satin Anodized Hydraulic Patch Fitting with 2-9/16" Setback - NHO
    CRL380BS CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO
    CRL380MBL CRL Matte Black Hydraulic Patch Fitting with 2-9/16" Setback - NHO
    CRL380PS CRL Polished Stainless Hydraulic Patch Fitting with 2-9/16" Setback - NHO
    CRL380HA CRL Satin Anodized Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
    CRL380HBS CRL Brushed Stainless Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
    CRL380HMBL CRL Matte Black Hydraulic Patch Fitting with 2-9/16" Setback - 90º Hold Open Model
    CRL380HPS CRL Polished Stainless Hydraulic Patch Fitting With 2-9/16" Setback - 90º Hold Open Model

    Numero articolo:CRL380HBS
    Disponibile anche in questi cataloghi:
    AH18 Architectural Hardware Catalog 2018, PAGINA 211Z
    HR18 Architectural Railing Systems 2018, PAGINA 513B
    Colore:Brushed Stainless
    Spedire via::Si può spedire con UPS

    In questo momento non sono disponibili informazioni aggiuntive sul prodotto.

    Custom headers with 2-9/16" [65 mm] pivot points must be ordered if needed. These fittings are not compatible with the stock NH36xx and NH72xx.

    Il peso delle spedizioni è nella maggior parte dei casi approssimato e non è stato ancora verificato. Se si desidera ottenere il peso esatto, in modo tale da determinare i costi di spedizione come richiesto per completare l'ordine, si prega di richiederlo prima di inviare l'ordine contattandoCRL Assistenza al cliente.Le immagini dei prodotti sono dello stesso prodotto o di una fedele rappresentazione. ColorsI coloripossono variare a seconda della scheda video del vostro computer o del monitor e di come icolorcolorisono stati regolati.